Looking for a professional looking indicator light that's unobtrusive and easy to install? Our 12V-24V panel mount LED light is the perfect solution. These lights are an integrated, sealed unit that's protected against dust, debris and moisture to IP67 standards, so they'll hold up to harsh escape room environments.
To install these lights, simply drill a 6mm or 1/4" hole in your prop, then insert the LED and tighten the nut against the rubber washer. The LED will be securely mounted and the outer bezel gives a clean, finished look.
If you're used to using bare LEDs in your props, you may be aware that typical circuits require a current limiting resistor to protect your light. These LEDs have a resistor already installed internally, so you conveniently don't need to add one of your own - they're ready to go!
Specifications
To install these lights, simply drill a 6mm or 1/4" hole in your prop, then insert the LED and tighten the nut against the rubber washer. The LED will be securely mounted and the outer bezel gives a clean, finished look.
If you're used to using bare LEDs in your props, you may be aware that typical circuits require a current limiting resistor to protect your light. These LEDs have a resistor already installed internally, so you conveniently don't need to add one of your own - they're ready to go!
Specifications
| Voltage | 12V to 24V |
| Outer diameter |
8mm |
| Diameter of actual LED |
5.6mm |
| Diameter of hole to drill | 6mm |
| Threading on LED body | M6-0.5 |
| Depth of LED body |
20mm |
| Length of wires | 150mm (about 6in) |
| Current-limiting resistor | Included |
| Available colors | White, Red, Green, Yellow, Blue |